Use this device to extract the audio from any HDMI video signal for connection to audio equipment.

Tuotenumero: 301400024
Valmistaja: Hall Research
176.00 €0% ALV.
218.24 €24% ALV.
Pyydä tarjous

Use this device to extract the audio from any HDMI video signal for connection to audio equipment. The HDMI signal is reconditioned and boosted as it passes through the device, so it can also serve as an extender. The audio extractor also features EDID management (pass-thru or emulate), So it can emulate any HDMI display and is capable of extracting the audio even if no actual display is connected to the output. Both Toslink (digital) and two channel stereo analog outputs are available on the device. The EMX-HD-AUD is an HDMI transceiver, so it not only re-clocks the video data, it also separates and buffers the DDC channel on which EDID and HDCP are communicated. This can often resolve system-level HDMI signal-chain issues since the EMX-HD-AUD acts as an intelligent intermediary.

The EMX-HD-AUD can be powered from the HDMI source connected to its input and no additional power supply connection is needed for most applications.

The package includes a universal power supply in case the power from the HDMI input source is insufficient. The power supply is plugged in at the USB connector. When the USB port is connected to a PC (cable supplied), the unit is powered by the PC through the USB connection.

The EMX-HD-AUD also provides useful diagnostic information that can help is resolving compatibility of components in the video signal chain.

Hall Research EMX-HD-AUD GUI / Uploader
EDID Editor Software

Multi-color LEDs on the unit indicate the mode of operation with regards to EDID routing, and also provide real-time status on the HDMI video and audio signals. For example the LEDs can identify presence of audio and whether it is 2-channel or multi-channel. Similarly the detection of video from source is indicated and it identifies whether there is HDCP on the video or not.

When connected to a PC via the USB port, further details about the HDMI signal is available. The extracted audio is output as analog stereo on a standard 3.5mm connector as well as in digital audio format (SPDIF) on an optical Toslink connector. Normally the audio is left intact on the HDMI output, however the user can remove or mute the audio that is on the HDMI output. Doing so may be advantageous in applications where the connected TV’s speakers may be causing interference or echo due to the delay in the audio heard from the TV. Muting the audio output from the HDMI would ensure no sound is heard from the TV even if its volume is turned up.

The EMX-HD-AUD constructs an EDID table (capabilities list) for the connected source. This table is either copied verbatim from the connected display when the unit is in Pass-thru mode, or substitutes an internal EDID data from on board memory when in Emulate mode. The internal EDID data can be learned from any connected display by using the buttons on the box. EDID data can also be uploaded to the EMX-HD-AUD from a PC via the USB port. The device maintains HDCP compliance regardless of the EDID routing mode, so HDCP protected content passes through the system with protection intact even when the EDID is emulated from internal memory.

The EMX-HD-AUD is HDMI 1.3 and 1.4 (deep-color and 3D) compatible, and automatically compensates for the signal degradation caused by long cables of up to 50 ft (15 m) on its input and can drive HDMI cables on its output to 30 ft (10 m).

The package includes a universal power supply, a USB cable for connection to a PC, and the User's Manual. Free Windows® PC software is available from the Hall Research website. This software allows reading, saving, manipulating, and writing EDID tables to and from the device. The software can also control the operational modes and provides diagnostics such as indication of the HDMI input signal’s video and audio characteristics.


  • Extracts audio from the HDMI video
  • Extract audio with or without an actual display connected
  • Functions as a pass-through HDMI extender
  • Provides both digital and analog audio outputs
  • Can remove the audio from the HDMI output signal
  • Can learn and Emulate EDID from any display
  • LED indicators for Mode and HDMI status
  • USB port for device management with free software
  • Read and download any display's EDID to your PC
  • Upload desired EDID to the device
  • Surge protects HDMI input and output
  • Supports HDCP, HDMI deep-color and 3D
  • Designed and assembled in USA


Power Supply:
  • 5 vDC, 1.2 ADC
  • Integral mini-B cable
  • 90-264 VAC, 47-63 HZ


  • 2.71" (W) x 2.825" (D) x 1.25" (H)
  • 68.83 mm x 71.76 mm x 31.75 mm


  • 1 lb
  • 0.453 kg

Operating Temp:

  • 32 - 122 °F
  • 0 - 50 °C

Storage Temp:

  • -40 - 185 °F
  • -40 to 85 °C


  • 10 - 90% non-condensing


  • Convection


  • Black Plastic ABS-94VO, UL File #56070


  • ISTA 1A in carton (International Safe Transit Association)


  • CE


  • CE, FCC Class A


  • 90,000 hours


  • 2 Years parts and labor


  • 1.1 Full Speed

Supported Video Formats:

  • DVI 1.0, HDMI™ 1.4, HDCP 1.0

Supported Audio Formats:

  • LPCM (2, 5 and 7 channel)
  • Dolby 5.1 or 7.1
  • DTS 5.1
  • 16, 20, 24 bit


Lauri Vigelius
044 585 4467